A bicycle is made of many parts, and bolts help to hold the parts together. However, all bolts are not all the same, and they can differ in size and type.
When a bolt becomes loose, a hex wrench or a Torx wrench should come in handy to tighten the bolt. You rarely need to replace a bolt unless it falls off or wears off due to frequent adjustments, especially with the wrong tools.
Below are a few types of bolts on your bike, their location, purpose, and the right tool used to tighten them.
1. Brake Bolt
This bolt is found above the wheels on the rear brake bridge and top of the front fork. It …

The bike chain is one of the components of a bike that needs replacing more regularly. This is because it undergoes a lot of movement and stress, making it wear out faster.
Over time, the internal bushings of the chain links slowly lengthen as they wear out. This loosens the chain, putting a lot of pressure on the cassette cogs and the chain teeth. This chain of events causes the bike chain to wear faster. To avoid wearing out your chain system, replace the chain every 2000 kilometers. However, the frequency of replacement depends on the rider’s riding style.
How to Fix Your Bike Chain

Find the proper chain. …

Whether you take your bike on smooth pavements, rocky tracks, rough gravel, or earth trails, you will likely deal with a flat. However, this should not be a problem if you know how to fix a flat and change a tire.
Below is a step-by-step guide on how to change a bike tire and fix a flat.
Tools Needed:
Before you begin any fixing, you should have in hand several essential tools. This includes tire levers, a spare tube, an air pump, and patch kits or tire plugs.
Steps:
1. Remove the Tire
Place your bike in an upright position shift the drive …

It is inevitable to experience wear out on different parts of your bike. This is no exception for the shifter cables, which wear out after several kilometers of cycling.
Worn-out shifter cables are a nuisance and hinder smooth-riding. The cables get stuck on the housings and can also get caught up on other parts causing avoidable damage. The shifting becomes a nightmare, and you are never going to catch up if you are racing.
Therefore, to avoid unnecessary shifter cable troubles, follow these steps to replace your worn-out shifter cables.
Get the Right tools
Before any replacement, you will …

In the last decade, online shops have replaced the brick and mortar shops. Many people are now ordering their purchases from online shops instead of buying from physical shops.
Bikers have also taken up online shopping to buy their bikes. However, the bikes come in parts, and you are left with assembling the parts.
So how do you assemble a bike? Here is the ultimate guide.
Step 1: Find the Right Tools
Before you begin to assemble, you will need several essential tools. These include a repair stand, wheel truing stand, cone wrenches, wire cutters, a pedal wrench, a set of Allen keys, …

To keep your bike at optimal performance levels, you must give it some TLC. This means cleaning, tightening, lubricating, fixing, and repairing. To ensure this, you need the right repair tools in your garage.
This article is an overview of the types of tools that you need for DIY minor repairs and essential maintenance.

Cleaning Agents

A clean bike functions better than one carrying a load of dirt. It is always a good idea to clean your bike regularly, and this is where cleaning supplies and rags come in. The suitable cleaning agents will remove dirt from your chain and sprockets.
…